Disc Wheels on Model A
 

I'm working on a speedster project and want to use disk wheels off a Chevy. I found the thread below but no one said they had done it. The stud circle is the same but Chevys have 6 studs rather than 5. It would be nice to buy Model A hubs and drums without the stud holes so I could drill my own. Does any one know who is making the new hubs and drums?


Previous thread:
https://www.fordbarn.com/forum/showt...vy+disc+wheels.


This is the look I'm after:

Re: Disc Wheels on Model A
 

That's a nice original Mercury bodied model T - probably has 21" Baker disc wheels on it !

Re: Disc Wheels on Model A
 

Yeah, I love the shape. The only disk wheels I've ever seen on Ts or As were either Chevy or Disteel (30"). Those bodies have also been put on an A chassis. My project is a composite - Model T Fronty engine connected to Model A drivetrain. Unfortunately, my Mercury body was very rough and missing most of the special Mercury parts. I would very much like to locate a windshield and step plates.

Re: Disc Wheels on Model A
 

Here is a Swedish speedster with Michelin disc wheels (sorry I do not have a side view of the car):

https://www.fordbarn.com/forum/attac...1&d=1742620027

.....and here are those same Michelin disc wheels on a Tudor:

https://www.fordbarn.com/forum/attac...1&d=1742620187


....and a close up:

https://www.fordbarn.com/forum/attac...1&d=1742620187

Brad in Maryland



.

Re: Disc Wheels on Model A
 

Re: Disc Wheels on Model A
 

I have demountable Motor Utilities 23" discs on my Racer - zoom-zoom !

Re: Disc Wheels on Model A
 

Disk wheels were the "Mag" wheels of the period. I've seen lots of period ads and photos of them but few on cars today other than Chevy wheels. The maroon Mercury photo is obviously not period (color photo). I believe those are Chevy wheels since they have separate rims held on with four bolts.

Re: Disc Wheels on Model A
 

Baker 21" de-mountable were made for Model Ts & used the stock Ford 21" split rim w/4
lugs !

Re: Disc Wheels on Model A
 

Dodge Brothers disc wheels{Michelin} are fairly easy to find. Used from '22 to about '26. But they are heavy.

Re: Disc Wheels on Model A
 

There were also aftermarket disc covers available back in the day. They fit over the spokes.

Re: Disc Wheels on Model A
 

like thisa one...................




https://scontent-lga3-2.xx.fbcdn.net...XA&oe=67E4F36E

Re: Disc Wheels on Model A
 

I like them.

Re: Disc Wheels on Model A
 

There was a 28 Model A delivery van at the NZ Masterton rally with disc wheels on from way back.
let me know if you want his details
Lawrie

Re: Disc Wheels on Model A
 

Yup....like these FLASQUES that were available in France for your 1929 Ford:

https://www.fordbarn.com/forum/attac...1&d=1742786777


Brad in Maryland




.

Re: Disc Wheels on Model A
 

A possible answer for the original post is to contact Randy Gross at 714-292-8660 or email Randy at [email protected]. Randy makes the cast iron hubs. I’m sure he could do what you are asking for.

Re: Disc Wheels on Model A
 

Grier, thanks for the information that addresses my original question. I'll give Randy a call.