The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   1935 hydrostatic dash gas gauge restoration (https://www.fordbarn.com/forum/showthread.php?t=346345)

flathead34 02-09-2025 02:27 PM

1935 hydrostatic dash gas gauge restoration
 

We are looking for a source that can restore our 1933 and 1935 hydrostatic dash gauges. These are the ones that have the red fluid in the tube. We have run out of gas not knowing we were that low. Any help in finding a source that can rebuild these gauges would be appreciated. Thank you and happy V8ing. Mike.

deuce lover 02-09-2025 03:16 PM

Re: 1935 hydrostatic dash gas gauge restoration
 

Renners Corner in MI. Williamsons Instruments in Arkansas also. I have done quite a few but to far away and shipping is a killer.

terry 02-09-2025 04:02 PM

Re: 1935 hydrostatic dash gas gauge restoration
 

if you haven't done so already, go to "search" at the top of this page. There has been a lot of threads on this topic. terry

mclark12 02-11-2025 08:24 PM

Re: 1935 hydrostatic dash gas gauge restoration
 

Williamsons in Arkansas restored mine about 3 years ago and it’s still working as it should.
I was happy with their work, but he did have it for a couple of months or so.

RENNERS CORNER 03-18-2025 01:59 AM

Re: 1935 hydrostatic dash gas gauge restoration
 

I recommend inspecting your enter fuel gauge system first. The unit in the tank might be junk, the air line to the gauge might be plugged. The unit in the dash is the easy part, I make kits for that part.


All times are GMT -5. The time now is 08:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.