37 flatbed pickup question
 

I finally got around to changing the wood on my flatbed frame risers and I just noticed the rather inconspicuous​ threaded holes in the bed within the fender cutouts. Any idea what might have went there or could it be aftermarket? One has been filled partially.

Sent from my SM-S908U1 using Tapatalk

Re: 37 flatbed pickup question
 

Can you post a few pictures? It's hard for me to figure out without being able to see something. Thanks.

Re: 37 flatbed pickup question
 

It might have been eye bolts that were around the bed. I will look at the bed I have and see if it has that.

Re: 37 flatbed pickup question
 

My "39 had several unused holes. I believe the fenders were not correct.

Re: 37 flatbed pickup question
 

I looked at my bed, there are two cage nuts on either side of the bed in the fender recess area. They don't have anything to do with the fender attachment. Not sure why they are there?

Re: 37 flatbed pickup question
 

Wait.... There where Eye bolts around the bed? Can we start a thread all about the eccentricities of the 37 1/2 ton flatbed?

And yes, it was the two cage nuts and the photos I took in the forum didn't post..... Lost to the ether

Sent from my SM-S908U1 using Tapatalk

Re: 37 flatbed pickup question
 

Some pictures of the cage nuts and bed