Aftermarket gauges to fit original openings
 

Does any aftermarket company make a gauge set that will fit the openings on a 36 dash? My speedo works well enough, but the temp/oil/amp and ESPECIALLY the fuel gauge are unreliable. I have some mini gauges in my glove box but I would prefer to view these from the designed original position and have a glove box for other items.
Not interested in hanging additional stuff off the bottom of the dash, or spending too much for restoration of the original gauges.

Re: Aftermarket gauges to fit original openings
 

It’s probably the sending units or bad connections.
the operating system of the gauges and senders have to match to have proper operation.

Re: Aftermarket gauges to fit original openings
 

Has the car been converted to 12v?

Re: Aftermarket gauges to fit original openings
 

This is next on my 36 list
I seen that panel I believe dolphin guages sell but looks like you gotta cut dash