|
Door latch rebuild. Finding parts 1 Attachment(s)
On my 39 truck I started rebuilding the door latches. I did the passengers side first and it was easy with just a bit of welding to repair the worn surfaces. Now the drivers side. It needs more welding to fix the worn surfaces and it was missing the anti rattle spring plate (see pic). Where can I get this part? Or do I need to get another latch for parts?
Thanks I need the part circled in red. This is not my picture I found this picture on the internet and used it to show what I need. |
Re: Door latch rebuild. Finding parts You need a donor latch
|
Re: Door latch rebuild. Finding parts Quote:
|
Re: Door latch rebuild. Finding parts Action yobo: What model Ford truck are you working on? Is it a pickup or another model?
I am finding that vendors sell the same latches for 1938-40 Fords claiming they fit. https://www.bing.com/search?q=1939+f...ANAB01&PC=HCTS |
Re: Door latch rebuild. Finding parts I am building a 1939 1 ton express truck.
I see them latches for $300 and up but that’s a chunk of change to get a part as most of the ones forsale are passenger sides so the only part that would be usable in the drivers side would be the spring plate and keeper. |
Re: Door latch rebuild. Finding parts Try Fred at Southside Obsolete in MN.He might have one.The drivers side is always the one wore out.
|
Re: Door latch rebuild. Finding parts While you’re looking. Look some different year model Ford latches. I rebuilt my 32 latches from parts of other unknown year latches.
|
Re: Door latch rebuild. Finding parts Quote:
|
Re: Door latch rebuild. Finding parts 1. You will have to find a donor part for the spacer, or make one. I suggest phosphor-bronze spring material, McMaster-Carr would be a source, also many hobby shops catering to the train and RC plane crowd may have some.
2. 1938-1947 commercial and truck 1/2 ton and up (including cabover) all used the same latches for the front (or only) doors. |
Re: Door latch rebuild. Finding parts 1 Attachment(s)
Made one from a disc brake pad retainer.
Will see how it holds up |
Re: Door latch rebuild. Finding parts Quote:
|
Re: Door latch rebuild. Finding parts The spring plate is working good. It’s keeping pressure on and the door has been opened and shut around 100 times since the rebuild so I would say it’s successful so far
|
Re: Door latch rebuild. Finding parts Those springs are readily available. They are used in most early FORD door latches. I have even used them in C1 Corvettes.
|
| All times are GMT -5. The time now is 10:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.