The Ford Barn - Cam Specs Again

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Cam Specs Again (https://www.fordbarn.com/forum/showthread.php?t=337655)

Ken/Alabama

04-12-2024 05:15 PM

Cam Specs Again

1 Attachment(s)

Picked up this 8BA cam yesterday. Has no card in the box. Anyone have any information about it ? Thanks

Pete	04-12-2024 05:23 PM

Re: Cam Specs Again

Nope.

petehoovie

04-12-2024 06:27 PM

Re: Cam Specs Again

Quote:

Originally Posted by Ken/Alabama (Post 2304217)

Picked up this 8BA cam yesterday. Has no card in the box. Anyone have any information about it ? Thanks

https://www.fordbarn.com/forum/attac...1&d=1712960139

Ken/Alabama

04-12-2024 07:08 PM

Re: Cam Specs Again

It’s an old regrind but never run. It’s in an Isky box but not sure it’s an Isky cam.

Pete	04-12-2024 09:21 PM

Re: Cam Specs Again

As far as I know, Isky never stamped his cams like that. They always had the name.

Ken/Alabama

04-12-2024 10:26 PM

Re: Cam Specs Again

Quote:

Originally Posted by Pete (Post 2304271)

As far as I know, Isky never stamped his cams like that. They always had the name.

That’s what I’m thinking also. Based on the looks of the top of the lobes it has a lot of duration.

Ggmac

04-13-2024 05:12 AM

Re: Cam Specs Again

That looks like the markings on the JC whitney cam I bought many many years ago . I’m going from memory but it was the first HP cam I bought and I had to cut alot of lawns to purchase it . JC Whitney , the only catalog a 16 yr old needed .

All times are GMT -5. The time now is 04:07 AM.