49-52 6 & 8 Cylinder Intermediate Bellhousing.
 

I thought I knew but now not so sure. Is there any difference between the intermediate bell housing used on the 6 cylinder and the V8?

Re: 49-52 6 & 8 Cylinder Intermediate Bellhousing.
 

Not the same. Don't interchange.
https://www.jalopyjournal.com/forum/...#post-15007468

Re: 49-52 6 & 8 Cylinder Intermediate Bellhousing.
 

Are you asking about the flywheel housing or the clutch housing (hogs head)? The parts book shows only one clutch housing for the 4 speed spur gear trans.

Re: 49-52 6 & 8 Cylinder Intermediate Bellhousing.
 

6 cyl is about 3/4" deeper. I could measure one tomorrow if you need to know.

Re: 49-52 6 & 8 Cylinder Intermediate Bellhousing.
 

I have 2 of them. A year ago when I bought them from a guy who thought they were for a V8 I asked on here about the fact that they were about 3/4 deeper than the 49-50 Merc's I use for my T5 conversion and nobody could answer my question. Please get back to me with the right depth so I can make sure that's what I have. I've sold my T5 kit to several customers with the 6 cylinder and the stamped steel intermediate bellhousing but the depth never came into play. I'm trying to help a customer do a conversion. Thanks for your response.