The Ford Barn - Pressure Plate ?

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Pressure Plate ? (https://www.fordbarn.com/forum/showthread.php?t=325992)

jimvette59

04-26-2023 03:27 PM

Pressure Plate ?

Can the 9" long pressure plate bolt up to the 9 1/2" bolt pattern ?

Kube	04-26-2023 06:08 PM

Re: Pressure Plate ?

Quote:

Originally Posted by jimvette59 (Post 2221817)

Can the 9" long pressure plate bolt up to the 9 1/2" bolt pattern ?

No.

DavidG

04-26-2023 06:11 PM

Re: Pressure Plate ?

This seems like a self-answering question.

Krylon32

04-26-2023 07:27 PM

Re: Pressure Plate ?

If you need one try Fort Wayne Clutch, Ask for Lou.

blueoval37

04-26-2023 11:12 PM

Re: Pressure Plate ?

Lou just rebuilt my pressure plate did excellent job

jimvette59

04-27-2023 07:45 AM

Re: Pressure Plate ?

Thanks blueoval 37

Ol' Ron

04-27-2023 07:50 AM

Re: Pressure Plate ?

Pretty easy to redrill the flywheel.
Gramps

jimvette59

04-27-2023 08:04 AM

Re: Pressure Plate ?

I just looked up the spects. for the 9" PP the bolts holes are three sets of two 120 degs.
apart with a 5.187 diameter and two 5 1/16 x 18 threaded holes 2.844 C to C. The 9 1/2" PP bolt holes are 3.000 apart . Just a note a 10" long does not work at all.

jimvette59

04-27-2023 08:14 AM

Re: Pressure Plate ?

Quote:

Originally Posted by Ol' Ron (Post 2221970)

Pretty easy to redrill the flywheel.
Gramps

Thanks Ron. I will do that. I was just looking for a quick answer after drilling for a 10 long that does not work. Please see my last post Well back to the drawing board.
Not putting down The HAMB but i got so many stupid remarks i got so mixed up I ordered a 10 long.

All times are GMT -5. The time now is 12:53 AM.