NEW French BLOCK, 4" Merc Crnk/Rds/Tall WEIAND 2X2
 

City: Huffman

State: Tx

Price: $4,000

.

FOR SALE: As a PACKAGE ONLY!

My health and age have finally taken their toll on me. This is the last of my beloved TOYS. This 'package' must be picked-up Huffman, Tx., as I cannot ship it. We have a hoist to help the block into your pick-up.

One brand-new FRENCH BLOCK. This one I believe cast in 1988. My wife surprised me with it for Christmas when Richard Lejuerrne first brought these blocks into the US 20+ years ago. This block is still with its wooden shipping crate, as well as still being coated with the Cosmoline they were originally packaged with. The block has the three MAIN CAPS bolted in place.

1949 8CM 4" Crankshaft taken out of a '49 Merc engine that the son of this old rancher wrecked in the late '50s. Included are the eight rods and MERCURY pistons that originally ran together. The crank was perfect when taken out of the engine... has light rust glaze on throws. MAY polish, or at least should clean-up at .010/.010.

I have a beautiful BLACK POWDERCOATED pre-'49 oil pan which these FRENCH blocks require because of the transmission/bell area.


https://www.fordbarn.com/forum/attac...6&d=1678555192


We have an early "WEIAND", tall 2 X 2 intake. This rare manifold has never been modified NOR bead blasted. A little dirty, but as original as when cast 75 PLUS years ago.

https://www.fordbarn.com/forum/attac...7&d=1678555773


https://www.fordbarn.com/forum/attac...0&d=1678555773


https://www.fordbarn.com/forum/attac...9&d=1678555773


https://www.fordbarn.com/forum/attac...8&d=1678555773




One pair of NOS Ford 'nothing special' ALUMINUM, 24-stud cylinder heads that would polish-up just dandy.


https://www.fordbarn.com/forum/attac...0&d=1679087804


https://www.fordbarn.com/forum/attac...9&d=1679087804


Choice of 2-bolt OR 3-bolt front cam cover.

We also have a FEW "8CM" parts that can be thrown-in from the original Merc engine, such as exhaust, etc.... ASK!

This is all NICE, NO B/S stuff.

WE WILL NOT SPLIT-UP! NO SHIPPING!

$4,000/ALL, in American $20 bills, please.

Send me a PM!


The Coopman

.

Re: NEW French BLOCK, 4" Merc Crnk/Rds/Tall WEIAND 2X2
 

.Back Up Top

This is one heck of an opportunity to build a nice street engine, especially for an earlier car. This PACKAGE has a whole slew of the "right" parts already included. I hear that SCAT 4" crank packages have gotten up to $3,800 at Speedy Bill's. And like I said initially, there are additional "8CM" Merc parts included for the asking. Let's talk!

Dick Davidson/The Coopman

Re: NEW French BLOCK, 4" Merc Crnk/Rds/Tall WEIAND 2X2
 

Back to top!

Re: NEW French BLOCK, 4" Merc Crnk/Rds/Tall WEIAND 2X2
 

This French flathead package has sold. Thank you to everyone!


Coop


.