Stock Ford Model A frames
 

I have a stock 1929 Ford Model A frame. The body I have is a 1930 Ford Model A Fordor with a body by Murray. Will the body I have fit the frame I have.? Thanks for any help anybody can be with this.

Re: Stock Ford Model A frames
 

Front cross member would be incorrect.

Re: Stock Ford Model A frames
 

The 30/31 cars dropped the location of the radiator mount pads for the taller radiator profile.

Re: Stock Ford Model A frames
 

Easy enough to switch out the front crossmember.

Regards
Bill

Re: Stock Ford Model A frames
 

Thanks for all of the reply's. Since this is my first Model A. It looked like the frame was going to be a little bit short in the area between the rear spring and the back end of the body.

Re: Stock Ford Model A frames
 

BillCNC-
I’ve done many change outs and have the setup.
But still not “a day at the beach” thingy imho
Particularly for a novice
Ilirbie- great time to make sure frame is level and square before setting a body on it.
That subject is quite common on this site

Re: Stock Ford Model A frames
 

The height change on the crossmember is about 3/16". you can shim the body to make up the difference.

Re: Stock Ford Model A frames
 

All bodies overhang the rear x-member.