best plugs to use in stock 36 engine
 

i have been using champion, suggestion was ngk, any opions would be helpful,
also on spark plu wire st?, thank you, bob

Re: best plugs to use in stock 36 engine
 

i have NKG in my 35 motor

Re: best plugs to use in stock 36 engine
 

After 25 yrs of using Champs i tried a set of NGK. Threw in the garbage can after a mth. Went back to champ. I use "D-21" fairly hot plug and works just fine as before the NGK. OMO. ken ct.

Re: best plugs to use in stock 36 engine
 

I have had good luck with AC-216 in both my '35 & '40 motors. Pat

Re: best plugs to use in stock 36 engine
 

Pat 35 takes 18mm plugs/40 take 14 mm cant be same # plug. ken ct.:)

Re: best plugs to use in stock 36 engine
 

Good eye Ken. How is the no smoking thing progressing? Great, I hope.

Re: best plugs to use in stock 36 engine
 

I think any of those early engine are better off with a little hotter plug than thay call for. Walt

Re: best plugs to use in stock 36 engine
 

My coworker says he rarely sells Champions because of how bad they are. They have the worst resistance that he has said. I personally stick with Champions on the older stuff though. Have had no problems. Next I would pick AC Delco.

Re: best plugs to use in stock 36 engine
 

That sounds more like an Autolite number to me, Is that what you mean't to say?

Re: best plugs to use in stock 36 engine
 

Motorcraft SP-484 BTS8 . These are Amerian made and designed by Ford Motor Company. They have black parkerized base and a threaded top.

Re: best plugs to use in stock 36 engine
 

Ken...You are correct.....I knew that! I have too many cars! Is that possible? lol Pat

Re: best plugs to use in stock 36 engine
 

Yea i had 2 @ 1 time it was 1 too many.See you in Auburn in Augest. ken ct.

Re: best plugs to use in stock 36 engine
 

Here is a little different twist for you.I buy adapters and run 14mm plugs in mine.Why?Because of the vast selection of heat ranges and they just seem to run better to me.Just an opinion. James

Re: best plugs to use in stock 36 engine
 

autolite 216 works in my not so stock 36 motor.

champion h-10's went straight in the trash can and any champions that i find laying around the shop go straight in the trash can.

old champions were good. new ones are some of the worst on the market.

the h-10's in my recently purchased stock 40 looked like brand new and run like crap. put in a set of autolite 216's and it runs like a champ!...excuse the expression. and that's about the 4th time that same senerio has played out for me. just my penny's worth!

Re: best plugs to use in stock 36 engine
 

I use autolite 216's in my 1950 Fordson 8N tractor. They work real good in that banger too!