1935-36 pickup cowl lacing
 

The cowl lacing that I bought measures 3/16 thick (same as used around the grill shell). The relief around the cowl varies from + 1/4” on the top to + 3/16 on the side. The deeper area causes the hood to set below the cowl in this area.

Visually it doesn’t look right. Ford must have had a reason or the original lacing was different than the repo product today.

Any thoughts on this discrepancy?

Re: 1935-36 pickup cowl lacing
 

Whether it matters in your situation, Ford used a hard-core lacing and all that has been available in recent years is very soft and compresses quickly out of shape.

Re: 1935-36 pickup cowl lacing
 

Here's a drawing of the original lacing material M-17751

Re: 1935-36 pickup cowl lacing
 

Thank you Don.
Sounds like Ford did not adjust for the difference in lip depth.
The Vintique brand webbing i have is close @ .175-.180 thick x .6 wide