Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Hello. After the mad thrash of the wiring, final mopping up jobs and the first drive, the frequency of the videos may drop off a bit. I'm feeling a little burned out and need to take things at an easier pace. But nevertheless, here is a taster of the debugging process. This took place between the first drive and the run out to Gaydon.
Thanks for watching and following along.
Mart.
https://youtu.be/70th6kYK_CA

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Mart, I converted my original ‘41 air cleaner to a dry cartridge, I didn’t do any cutting just took it all apart and kept original pieces. I cut a thin piece of sheet metal into a round shape to fit into the bottom of the original cleaner and took the whole thing to my local NAPA. They found a filter that fit.

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Debugging can drive you "buggy"....thanks 4 sharing. I too converted to a paper element on the 52. Lots of simple ways to do it. Cheers!

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

If anyone deserves a break it’s you. Thanks for taking us along!

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Mart, It's okay to let the pressure to keep up quick pace of the episodes go away. You won't loose me as a fan and commenter, that's for sure!

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

I enjoy your channel immensely.
Thanks for all you do.

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Take a break today Mart. We all get those times we just need to step away and recharge our ambition.

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Mart, I would like to see you put some grommets in those holes in the firewall that the wires pass through so you don't cut through the wires. You don't have to make a video of it.:)

Thanks for taking us along on the project.

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Thanks for the feedback fellas.
Zeke: I put some edge protector around those holes to protect the cables. It may or may not be part of the next video.
Mart.

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Love your channel Mart it's "ace".
Take a well desrved break you have done well with these weekly posts for the the last few years but don't stay away too long......we'd rather see a "nuts Mart" than no Mart at all.Come to think of it we are all "nuts", just to varying degrees. Seriously though you look after yourself.
"Catch you on the next one"

GB

Re: Mart's 32 Sedan. The debugging starts. Update 2021 Ep 34.
 

Really enjoy your videos Mart Thank You! Dave