The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Stromberg e fire distributor (https://www.fordbarn.com/forum/showthread.php?t=291559)

ROBERT JAM 12-13-2020 04:58 PM

Stromberg e fire distributor
 

Any one have used one that can give me information on their preformance. Thanks

scicala 12-13-2020 05:06 PM

Re: Stromberg e fire distributor
 

Here is a link to a post about it from not too long ago. Sounds like a good unit. Just need to install it per the manufacturers specifications.

Sal

https://www.fordbarn.com/forum/showthread.php?t=261218

JSeery 12-13-2020 05:07 PM

Re: Stromberg e fire distributor
 

Do a search, there are several threads on them, none of them with much good to say about the distributor.

Looks like scicala reads the threads differently than I do! :)

scicala 12-14-2020 01:29 PM

Re: Stromberg e fire distributor
 

"Looks like scicala reads the threads differently than I do!"


I guess I was being optimistic and going by Stromberg's response to the complaint. I personaly have no experience with them.

Sal

Henry Hopper 12-14-2020 02:35 PM

Re: Stromberg e fire distributor
 

Great product and great back up service if needed.... lots of my friends have them and swear by them...

Jembow 12-14-2020 05:18 PM

Re: Stromberg e fire distributor
 

Worked fine for me once the engine was running, but I had starting problems on 6volt. I think the starter was causing voltage drop so the unit wouldn't energise. Gone back to a helmet.


All times are GMT -5. The time now is 11:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.