1952 ford f1,door sag
 

Door sag,anybody have any luck with a certain fix,drill for bigger bushings and pins,or hinge replacement?

Re: 1952 ford f1,door sag
 

are the pins loose in the hinge? if so drill for larger pins, if not place a piece of wood between lower hinges and gently close the door and push on it, usually raises the rear of the door to free it up

Re: 1952 ford f1,door sag
 

After replacing the body rubber shims on my 39 Tudor, both doors had a sag to them. They fit fine before. I removed the shim at the B pillar and that brought the doors up about 1/4" which is much better.