Anybody remember redmond ingnitions
 

I have a 3 bolt ignition that he converted about 15 years ago 6v positive ground my customer hooked it to 12v negative and fried the module . i can't find a replacement Pertronix module because the part number was on a plate that he removed to convert it . Does any body know the part number of the modules that he used, I understand he has passed away.

Re: Anybody remember redmond ingnitions
 

Try contacting Jere Jobe at VINTAGE CARBURATION TECH. NORTH. Jere is the man who created these Pertronix distributors and eventually Remond took them over. He may still have the part number information. He's in Montana. My last phone number is (406) 857-2137

Re: Anybody remember redmond ingnitions
 

Go to post #:4 on this thread:
https://www.fordbarn.com/forum/showt...onix&showall=1
Michael Driskel tells us that the Pertronix units are not reliable in helmet distributors and he knows his stuff.

Re: Anybody remember redmond ingnitions
 

Thanks for the info guys! much appreciated. there's a wealth of knowledge on this site. Merry Christmas to all.

Re: Anybody remember redmond ingnitions
 

Skip made some coils for them, had an extra wire.
He had trouble with almost all he made. G.M.