1933 -34 Ford sheet metal
 

City: Anchorage

State: ALASKA

Hey Guys ! I am looking for a patch panel for my passenger side fire wall. The previous owner cut a battery box hole in the otherwise nice firewall. all 33 - 36 ford cars and trucks have the same area needed for my project. This will increase my options .
Also looking for a outside header above the windshield panel. All the 33 - 34 take the same part. Mine looks like someone hauled something on the roof and tried to repair it , not a good job.
Thanks Vic

Re: 1933 -34 Ford sheet metal
 

bump

Re: 1933 -34 Ford sheet metal
 

Had some leads but none panned out.

Re: 1933 -34 Ford sheet metal
 

Did some research and found that the section of firewall needed for my 33 is the same for all 33 -36 ford cars and trucks. This will open up more options.
Any leads also appreciated.
Vic

Re: 1933 -34 Ford sheet metal
 

Getting closer but no cigar

Re: 1933 -34 Ford sheet metal
 

Bump back to the top. Still looking.
Any help is appreciated

Re: 1933 -34 Ford sheet metal
 

Still on the hunt. Have located some parts but those were worse than what I have .
Vic

Re: 1933 -34 Ford sheet metal
 

Still looking , found a lot parts but all are worse that what I have .
Thanks for this site
Vic