The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   tail pipe (https://www.fordbarn.com/forum/showthread.php?t=216534)

1931flathead 03-11-2017 08:28 PM

tail pipe
 

were can a buy tail pipe for a 1953 ford car looking for duals

toby 03-12-2017 11:37 AM

Re: tail pipe
 

Try: www.waldronexhaust.com

1931flathead 03-12-2017 11:37 AM

Re: tail pipe
 

I looked on ebay did not find any

rotorwrench 03-12-2017 01:48 PM

Re: tail pipe
 

Fords that have the front mounted cross over pipe may require a change of exhaust manifolds to get a better shot for duals. A good muffler shop may be able to form up a set for you but you might have to ask around to find out what shop might be the best bet.

tubman 03-12-2017 01:58 PM

Re: tail pipe
 

Decided to pass on the '51, eh? Good choice.

As to tailpipes, I think a stocker will work on both sides. The problem is the exhaust pipe. Unless you do some more changes, it comes off the front of the drivers side exhaust manifold and loops up and back over the steering and dives down under the toeboard. The "Waldron" site mentioned above has a picture of their complete system. The driver's side headpipe is right about in the middle of the picture.

deuce lover 03-12-2017 02:22 PM

Re: tail pipe
 

Quote:

Originally Posted by 1931flathead (Post 1441636)
I looked on ebay did not find any


EBAY # 381999142719,maybe what you are looking for.

1931flathead 03-12-2017 02:47 PM

Re: tail pipe
 

it has header on it so that not the problem

1931flathead 03-12-2017 02:51 PM

Re: tail pipe
 

yep I just need the tail pipes only I email him last night

1931flathead 03-12-2017 02:56 PM

Re: tail pipe
 

Quote:

Originally Posted by tubman (Post 1441691)
Decided to pass on the '51, eh? Good choice.

As to tailpipes, I think a stocker will work on both sides. The problem is the exhaust pipe. Unless you do some more changes, it comes off the front of the drivers side exhaust manifold and loops up and back over the steering and dives down under the toeboard. The "Waldron" site mentioned above has a picture of their complete system. The driver's side headpipe is right about in the middle of the picture.

yep got a stock 53 but the headers came south or north Carolina has one small rust spot in the back floor board and a small rust spot in the pas side rocker

I looked on the site and seen it

1931flathead 03-12-2017 09:52 PM

Re: tail pipe
 

Quote:

Originally Posted by 1931flathead (Post 1441720)
yep I just need the tail pipes only I email him last night

he got back to me it is 175.00 with shipping

there is a guy does exhaust bending about 40 miles away I heard he does good work and is neat

I had couple done at a shop in town I had a pipe fall of after a week he it weld a quarter of a inch


All times are GMT -5. The time now is 12:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.