The Ford Barn - ccpu measurement needed

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - ccpu measurement needed (https://www.fordbarn.com/forum/showthread.php?t=215743)

larry harding

02-28-2017 09:37 AM

ccpu measurement needed

30/31 ccpu there are two pointed brackets that screw to the wood slats in the back of the cab. where do they go on the slats? what part of the seat back do they support?

Roger V

02-28-2017 09:43 AM

Re: ccpu measurement needed

Maybe this might help: http://www.fordbarn.com/forum/showthread.php?t=18109

Afordman31

02-28-2017 10:29 AM

Re: ccpu measurement needed

2 Attachment(s)

Quote:

Originally Posted by larry harding (Post 1435898)

30/31 ccpu there are two pointed brackets that screw to the wood slats in the back of the cab. where do they go on the slats? what part of the seat back do they support?

Larry, this is how I have mine on my Pickup!

larry harding

03-01-2017 07:59 AM

Re: ccpu measurement needed

i have the pointed hooks down low as in the other posts, but didn't know the hooks on the wood cross piece existed. right now i have the back of the seat against the cab back and below the cross piece. it looks as the top of the seat is in front of the cross piece rather than below it. is this correct?

All times are GMT -5. The time now is 01:36 AM.