35 pickup floorboards
 

ready to install the floorboards in my 35 pickup 1/2 ton. Not sure if I have all the correct parts. The wood floor piece fits ok as well as the metal toe board to the firewall. There is a space open around the clutch & brake pedals that look like they could use another part. The transmission cover in the photo doesn't look like it the correct one. FYI the parts are just laid in and not bolted down. Any thoughts would be appreciated.... Thanks

Re: 35 pickup floorboards
 

Had you noticed this pic of the floor in Vanspeed's '35? DD

http://img.photobucket.com/albums/v1...pscq2yf5wb.jpg

Re: 35 pickup floorboards
 

Just found those pictures after I pushed "submit" on my post. The pictures are perfect for what I need. Thanks for taking the time to respond.

Re: 35 pickup floorboards
 

Janko, Here are some images showing the pedal plate and a comparison of a 35 and 36 trans cover.

Re: 35 pickup floorboards
 

Jakno...The 35 pickup toeboard in the picture has some holes added in the left lower corner area. The un-modified toeboard does not have those. Perhaps someone over the years moved the starter switch or added a dimmer switch to the floorboard. Perhaps they are out of the picture, but I also do not see the battery access in the wooden floorboard.

Re: 35 pickup floorboards
 

Oldandtired, the battery has been moved to the truck bed. I think with the info I have from you folks what I have will make up my floorboards. Thanks for the help