The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   $600 side bowl (https://www.fordbarn.com/forum/showthread.php?t=190809)

Bob C 03-04-2016 12:11 PM

$600 side bowl
 

Saw this on Epay for a side bowl carburetor core.:eek:
http://www.ebay.com/itm/Late-1931-Fo...1Wz4Wl&vxp=mtr

Bob

jm29henry 03-04-2016 12:21 PM

Re: $600 side bowl
 

I know what I am buying at the next swap meet!!! LoL

C26Pinelake 03-04-2016 12:43 PM

Re: $600 side bowl
 

Sold for over $600, don't question the seller, question the mentality of the buyer and the bidders. Wayne

wrndln 03-04-2016 01:07 PM

Re: $600 side bowl
 

Is there something special or unique with the carburetor, beside being a side bowl? I don't know much about 31 model A's, being a 28/29 A owner. The carburetor isn't even rebuilt. This must be a shill bidder, which I don't understand as the seller would have to pay roughly $60 or $70 in PayPal and epay fees at the ending bid. It appears the last bidder was willing to go even higher, as he has two more bids after the winning bid.
Rusty Nelson

briphaeton 03-04-2016 01:29 PM

Re: $600 side bowl
 

It's because it is a Zenith 3 side bowl. How many zenith 3's have you seen?

Bob C 03-04-2016 02:01 PM

Re: $600 side bowl
 

1 Attachment(s)
It's a little hard to see but the one is this auction looks like a 3.
http://www.ebay.com/itm/2-FORD-MODEL...p2047675.l2557

Bob

Synchro909 03-04-2016 04:52 PM

Re: $600 side bowl
 

I'm confused - To my eye, it's not a side bowl. The bowl is still located in front of the carby, just like the others. The main difference I noticed was the weird way the fuel line would attach. That is at the side.
I've never seen such a carby. From a previous post, it seems it is from a 1931 model A. As far as I know, the Ford dealers here refused to accept any cars in 1931. Ford tried to ram more cars down their throats even though there were lots of 1930 cars left unsold. 1930 cars were still being sold new here in about 1932-3, I'm told. maybe that's why I haven't seen one but calling it a side bowl doesn't seem right. If it were a true side bowl carby, I could see the wisdom of it, considering the stalling problems inherent in the 28/9 Zenith carbies.

Synchro909 03-04-2016 05:19 PM

Re: $600 side bowl
 

Quote:

Originally Posted by Don Turley (Post 1252908)
The reference to "side-bowl" is for the fuel filter that is located on the side of the carburetor, rather than on the firewall. The bottom half of the carburetor still has the same configuration and the "bowl" of the carburetor is still on the front of the carburetor. You can read all about the different variations of the carburetors in the "Restoration Guidelines", Area 1, "Engine Compartment".

Right, got it (I think). So a side bowl carburettor doesn't have the bowl on the side. Now I AM confused!:eek::(:confused:
Whodathunkit?

briphaeton 03-04-2016 05:52 PM

Re: $600 side bowl
 

1 Attachment(s)
This is the carb we are taking about

Mike V. Florida 03-04-2016 08:05 PM

Re: $600 side bowl
 

If it really sold for that then PT Barnum was correct about a fool is born every minute. There are rebuilt and tested units for far less then 600.00 on Ebay.

Rowdy 03-04-2016 08:57 PM

Re: $600 side bowl
 

Maybe it is time to put my Zenith 3 lower casting on ebay. The 3 is alittle hard to read due to rust so probably won't bring top money. Rod

SteveB31 03-04-2016 09:34 PM

Re: $600 side bowl
 

Zeniths 3 Carbs are quite rare due to a very small number of them being made, and the fact that they were not well made , being very thin. Generally any of them, side bowls or not, bring $500-700. The non side bowl versions are even harder to find then the side owl versions.

RonC 03-04-2016 11:32 PM

Re: $600 side bowl
 

The 3 bottoms sell for more than than the 3 tops.

dave in australia 03-04-2016 11:48 PM

Re: $600 side bowl
 

It makes the -3 side filter I picked up for $30 seem like a bargain. I don't have any intention of using it, I just bought it as it was different to all my other Zeniths in my collection. Also, that there were no 31's originally bought into Australia, makes it a rare find down here, and most likely off a later import.

kenparker 03-05-2016 08:30 AM

Re: $600 side bowl
 

2 Attachment(s)
here are a couple pictures that show Zenith 2 Sidebowl and a Zenith 3 Sidebowl.

Arcieri 03-05-2016 12:10 PM

Re: $600 side bowl
 

2 Attachment(s)
Here are pics of my Zenith 3 carbs. They are pretty much restored to
RG&JS guidelines. Steve is right. Ford built them too thin.

Ray


All times are GMT -5. The time now is 04:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.