The Ford Barn - Deep hubcaps

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Deep hubcaps (https://www.fordbarn.com/forum/showthread.php?t=182977)

34fordy

11-18-2015 09:26 AM

Deep hubcaps

Does anyone know of a deep 10" hubcap that will cover the axle on rear and hub on front after installing 15" steel rims on a 34 mechanical brake car?

Thanks, Don

48 coupe

11-18-2015 02:40 PM

Re: Deep hubcaps

full moon ? from speedway mtrs.

Lanny

11-18-2015 03:28 PM

Re: Deep hubcaps

1 Attachment(s)

I found a couple older Ford dog-dish hubcaps that just barely cleared the
rear axle and front hub grease cap, but was unable to find a nice set of 4,
of either hubcap, SO.........

I bought these chrome center bullets that fit the 15" Ford wheels, then I used
chrome lug-nuts, and stainless outer beauty rings. The center bullets clear
the rear axle and front grease caps very well.

PM me if you want more info on them ;)

Click on picture to enlarge.

fordor41

11-18-2015 11:54 PM

Re: Deep hubcaps

I had 10 1/8" moons on my stock '41 with 15" rims until I changed to a Ford 9" and 15" rims. Now I run 50-51 Ford caps..

All times are GMT -5. The time now is 03:44 AM.