The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Lebonney Baron question (https://www.fordbarn.com/forum/showthread.php?t=174975)

Bob from Northport 08-04-2015 08:25 AM

Lebonney Baron question
 

One of our customers called LB about some tech questions on installing interior parts in a 28 2Dr. Apparently the main tech man has retired. The young individual on the phone apparently had no idea what to tell the customer, and was rather rude and short. The parts had been made by LB, but were not fitting at all. Anyone had any problems or concerns with LB as of late?? They have been great in the past.

Thanks!!

Mitch//pa 08-04-2015 08:28 AM

Re: Lebonney Baron question
 

here ya go Bob
https://fordbarn.com/forum/showthread...stomer+service

BRENT in 10-uh-C 08-04-2015 11:53 AM

Re: Lebonney Baron question
 

What do you need Bob? Maybe we can help.

(BTW; A lot of people have changed at L/B in the past few years including the ownership.)

BRENT in 10-uh-C 08-04-2015 11:56 AM

Re: Lebonney Baron question
 

Let me also add that incorrectly cut/installed wood has a great influence on how panels fit. Also, do not be afraid to template out the vehicle and peel back the fabric where alterations to the panel can be made. Then re-glue the fabric to the panel and install.

Bruce 08-04-2015 12:03 PM

Re: Lebonney Baron question
 

I'm pretty sure I had a short, unpleasant conversation with that young man a couple weeks ago. It did not reinforce any good vibes I had for a company that I've spent a lot of Model A bucks with in the past ten years.
Not to be political, but I would have fired him.
I miss Elizabeth.

duke36 08-04-2015 12:25 PM

Re: Lebonney Baron question
 

for that matter, has any one used Cartouche lately? I had a car with their kit some years back which looked good but the door panels were a little overpadded causing the cranks to wear into the material.

Mitch//pa 08-04-2015 12:26 PM

Re: Lebonney Baron question
 

car-douche yea do a search here
look at the wear spot on my avatar picture at the seat front.. thats with very very little use...

the door panel did the sames thing where my knee touches

Blessyouboys 08-04-2015 01:10 PM

Re: Lebonney Baron question
 

I think the name of the company you are referring to is LeBaron Bonney.

I have no clue who Lebonney Baron is.

mtelow 08-04-2015 01:28 PM

Re: Lebonney Baron question
 

I sent some door sills back to them and had to go to my credit card for the refund. I'll let Chase deal with them. I guess customer service is not what it use to be

Bob from Northport 08-04-2015 10:56 PM

Re: Lebonney Baron question
 

Your right. The company is LeBaron Bonney. Sorry, my fault.. wasn't watching my writing.
Thanks for the info. Thanks Terry!!

700rpm 08-05-2015 12:27 AM

Re: Lebonney Baron question
 

Interesting. I called for a sample card two weeks ago, and the fella I talked to was impatient, to say it kindly. I told him I needed to replace a moth-damaged panel, but wanted a current sample to see if the new fabric would match the old. He wanted to know when I bought the kit. When I told him 1979, he seemed a little lost as to how to repond to that. But we did get it straightened put, and the sample arrived in three days. BTW, the fabric matched.

Fred K-OR 08-05-2015 11:11 AM

Re: Lebonney Baron question
 

I asked about getting a new covering for my seat cushions in my 29 coupe. Got the info within a few days, with samples for the 29 coupe. Looks like they know what they are doing. But I have not ordered anything yet.

C26Pinelake 08-05-2015 11:38 AM

Re: Lebonney Baron question
 

Whenever I encounter an ignorant employee I speak with his superiors. Maybe you guys should do the same as if is possible that the owner(s) don't know they have a problem! Wayne

CarlG 08-05-2015 11:40 AM

Re: Lebonney Baron question
 

I find it's "Hit & Miss" with them. Sometimes they get right back with great information, and other times I'm ignored completely. The items I have bought from them are first class though.

Bob Bidonde 08-05-2015 06:23 PM

Re: Lebonney Baron question
 

I went with Classtique. Their upholstery samples were the same as LB's.

Boston Bruce 08-05-2015 08:41 PM

Re: Lebonney Baron question
 

FWIW, I live only a about 10 miles from LBB but I haven't been in there for a couple of years. I do hear that the "main tech man" Doug has retired.

BRENT in 10-uh-C 08-06-2015 06:23 AM

Re: Lebonney Baron question
 

Quote:

Originally Posted by Bob Bidonde (Post 1133990)
I went with Classtique. Their upholstery samples were the same as LB's.


Classtique has also changed owners ...and IMO this has not been a positive transition.

ronn 08-06-2015 06:58 AM

Re: Lebonney Baron question
 

https://fordbarn.com/forum/image.php?...ine=1273249047


I have no clue who Lebonney Baron is.


My Bonney flies over the ocean.................

BRENT in 10-uh-C 08-06-2015 07:30 AM

Re: Lebonney Baron question
 

Quote:

Originally Posted by ronn (Post 1134189)
https://fordbarn.com/forum/image.php?...ine=1273249047


I have no clue who Lebonney Baron is.


My Bonney flies over the ocean.................




:rolleyes: Hmmmm, did you take the time to read thru each of the posts in this thread to see if your question was answered? Did you miss Post #10 (reposted below) which would have given you the clue?? :rolleyes:




Quote:

Originally Posted by Bob from Northport (Post 1133565)
Your right. The company is LeBaron Bonney. Sorry, my fault.. wasn't watching my writing.
Thanks for the info. Thanks Terry!!


Bob Bidonde 08-06-2015 08:04 AM

Re: Lebonney Baron question
 

Re Classtique, the business split into kit making and installations. Mike owns the kit business (Classtique) and Elizabeth owns the installation business. Mike has been making kits since before the split.


All times are GMT -5. The time now is 07:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.