The Ford Barn - Tail Light Wire Shield

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (https://www.fordbarn.com/forum/forumdisplay.php?f=18)

- - Tail Light Wire Shield (https://www.fordbarn.com/forum/showthread.php?t=156047)

DD931

12-01-2014 05:39 PM

Tail Light Wire Shield

City: East Stroudsburg

State: PA

1 Attachment(s)

I need an original (not repro) tail light wire shield for a '48 pickup. I think any pickup will work, since the part number is B-13467. I have a nice new repro, but it doesn't fit. It can only be 1 1 1/4 inches high. The repro is 1 3/4 and fights with the fender. Rusty is OK as long as it's not rotten! Here's a picture showing the difference. I'd be happy to trade if you don't have the interference problem!! What have you got?

Norm MacIntyre
[email protected]

DD931

12-02-2014 10:35 AM

Re: Tail Light Wire Shield

Bump!

DD931

12-04-2014 10:11 AM

Re: Tail Light Wire Shield

Bump!

DD931

12-04-2014 10:12 AM

Re: Tail Light Wire Shield

I checked with Model A parts folks - same problem!

DD931

12-05-2014 10:25 PM

Re: Tail Light Wire Shield

Bump!!

All times are GMT -5. The time now is 04:04 AM.