The Ford Barn - ? for the V8 experts

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - ? for the V8 experts (https://www.fordbarn.com/forum/showthread.php?t=141351)

big job

06-05-2014 03:29 AM

? for the V8 experts

This I should already know (until CRS desesease) We have two EABs to
machine, I need too know the block bore for cam bearings. I have already
turned the I D of the bearing & need to know the OD. of the bearing or
block- reason; new cam bearings havent come yet and I just want to
machine the removal tool before hand without buying one when I can make one. thanks

sam

HP Hunter

06-05-2014 06:25 AM

Re: ? for the V8 experts

The housing bores on the blocks are 1.9275/1.9285.

I would make the tool about 1.922/1.924

This is assuming the cam brgs presently in the block are std.

Harry

HP Hunter

06-05-2014 08:51 AM

Re: ? for the V8 experts

What happened to the post that was above mine earlier, it had two nice pictures in it??

Harry

big job

06-05-2014 12:29 PM

Re: ? for the V8 experts

Quote:

Originally Posted by HP Hunter (Post 889305)

What happened to the post that was above mine earlier, it had two nice pictures in it??

Harry

Thanks Harry exactly what I need and yes standard and I got no clue about
your pictures - its not here thanks again

sam

19Fordy

06-05-2014 02:42 PM

Re: ? for the V8 experts

Big Job, I suggest waitng until the new cam bearings arrive.............just in case?

Pete	06-05-2014 08:03 PM

Re: ? for the V8 experts

My flathead V8 cam bearing driver is:
1.796 and the shoulder is 1.918

big job

06-06-2014 03:40 AM

Re: ? for the V8 experts

Quote:

Originally Posted by Pete (Post 889692)

My flathead V8 cam bearing driver is:
1.796 and the shoulder is 1.918

Great thanks, (I had a KRW ) and cant find it; more like it got borrowed
like every think else-gone......

sam

All times are GMT -5. The time now is 05:21 AM.