![]() |
help 33 engine id ? Guys I drug a "33" engine home tonight , realy dont know what it is , has 33 style clutch 46 intake 33 oil pan painted greeen & been sitting for 30 plus years anu ID clues before i dissmantle much appreciated
Thanks Cheers Tony |
Re: help 33 engine id ? No pictures...
|
Re: help 33 engine id ? Pull up the block ID thread by 38coupe . Should answer all your questions .
Quote:
|
Re: help 33 engine id ? 33-5 all are basically the same block. Later blocks have the breather tube in the valve valley. If I remember right, pan did not change until the block with the breather tube.
|
Re: help 33 engine id ? I believe that you meant '33-'34 blocks. '35 blocks are vented as are their oil pans.
|
Re: help 33 engine id ? Thanks for all the help guys , its a 33-34 then as the pan or block(pulled intake last night) not vented .
Thanks again !! Cheers Tony |
Re: help 33 engine id ? Seen an early 33 block which was just like a 32(no cavity between water inlet and timing cover) , the petcocks were angled and not straight down.
|
Re: help 33 engine id ? Late 32 engines used the identical steel pan as the 33-34 engines except for the dip stick boss. Check your engine for straight down water drains. You might get lucky.
|
| All times are GMT -5. The time now is 03:15 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.