The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   1939 coupe project (https://www.fordbarn.com/forum/showthread.php?t=262645)

Pete Fl/Wi 04-30-2019 08:51 AM

1939 coupe project
 

1 Attachment(s)
The fun begins ###
I made a mistake on project it is a 38 coupe
Senior moment

GaryU. 04-30-2019 09:30 AM

Re: 1939 coupe project
 

Now we want to see more. Keep those pics coming please. Are you in Florida or Wisconsin for this endeavor?

Zeke3 04-30-2019 09:41 AM

Re: 1939 coupe project
 

Doesn't look too bad. I still have not removed the 50 year old fiberglass/bondo repair on my 37 coupe to see what remains of the original panel. I can see a bunch of sheet metal screws on the inside from someone else's "repair" attempt. What shape is the tool compartment floor in? Mine won't hold water for sure.

Pete Fl/Wi 04-30-2019 09:59 AM

Re: 1939 coupe project
 

1 Attachment(s)
In Wisconsin for body and frame work. I will bring it to Florida next October for interior and wiring. Hope to have it on the road by next Christmas. Engine and trans are ready.

rotorwrench 04-30-2019 11:09 AM

Re: 1939 coupe project
 

Just love those 39 & 40 coupes. That one looks better than a lot I've seen. It will take plenty of work but its worth every bit.

corvette8n 05-01-2019 06:24 AM

Re: 1939 coupe project
 

Great looking motor.

40cpe 05-01-2019 05:31 PM

Re: 1939 coupe project
 

1 Attachment(s)
Is this the car you are re-working?

Pete Fl/Wi 05-01-2019 06:49 PM

Re: 1939 coupe project
 

Yes that is the car.
Pete

KiWinUS 05-01-2019 07:46 PM

Re: 1939 coupe project
 

One of my favorite models Pete!
I love it!!!
Enjoy
Cheers
Tony

40cpe 05-01-2019 08:34 PM

Re: 1939 coupe project
 

Quote:

Originally Posted by Pete Fl/Wi (Post 1752988)
Yes that is the car.
Pete

Please let me know what you do to the frame to get the T5 in there. It might be a challenge to get that fan set-up in that car with the engine in the normal position.

Pete Fl/Wi 05-02-2019 08:28 AM

Re: 1939 coupe project
 

1 Attachment(s)
The frame showed signs of damage with decent repair and tube shocks but sat a little low on one side. knowing I was going with a t5 I decided to go with a aftermarket chassis. The plan is stock look,stock trim and wheels..
Before I get bumped off the Barn I want to give a shot out to Ol'Ron for introducing me to a Merc intake with Rochester 2g. I have used this setup on two other builds. Makes for a great setup for a mild flathead.

40cpe 05-02-2019 09:45 AM

Re: 1939 coupe project
 

That is a good looking chassis. It should ride and handle great!

G32 05-02-2019 02:19 PM

Re: 1939 coupe project
 

1 Attachment(s)
Quote:

Originally Posted by 40cpe (Post 1752966)
is this the car you are re-working?

Attachment 395565

This coupe is a 1938 standard.

Hope this picture shows-need practice.

Gene Tulsa

Pete Fl/Wi 05-02-2019 03:17 PM

Re: 1939 coupe project
 

1 Attachment(s)
You are right. 1938 I have a mind block because of my 1939 PICKUP. Senior citizen!!!
Second time you got me. Thanks

rotorwrench 05-02-2019 05:58 PM

Re: 1939 coupe project
 

The 38 standard is still a nice car.

JSeery 05-02-2019 06:53 PM

Re: 1939 coupe project
 

I love the looks of the 38 std!

Ben38 05-04-2019 08:25 AM

Re: 1939 coupe project
 

Me too!

sidevalve8ba 05-04-2019 08:44 AM

Re: 1939 coupe project
 

'38 Standard is one of my favorites, too. Especially the coupes.

Pete Fl/Wi 09-04-2019 07:01 PM

Re: 1938 coupe project
 

4 Attachment(s)
Some build pictures. Hope to have it done by mid October.

RKS.PA 09-04-2019 07:15 PM

Re: 1939 coupe project
 

Pete, that is going to be one awesome coupe. Love that dash, steering wheel and seat!!:)


All times are GMT -5. The time now is 09:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.