Flathead 471 Blower manifold i am making 5 Attachment(s)
[A new Flathead V8 471 blower intake manifold i am making. It's off next week to be blasted / heat treated and then to the machinist to have the stud holes drilled and the top and bottom machined flat.
|
Re: Flathead 471 Blower manifold i am making Love it!!!
Do you plan to sell any ? |
Re: Flathead 471 Blower manifold i am making Won't have to prune on that one. Will it have a pop off valve?
|
Re: Flathead 471 Blower manifold i am making ON an 8BA, it would be nice to have access to the pan breather. Also, consider other blower such as the 3.8 Buick Eaton. These are inexpensive #5 blowers for near stock engines that can offer good power and economy for less costs. I'd like to put one on a stock 239 and see what it does.
|
Re: Flathead 471 Blower manifold i am making The GM and SCoT blowers do stand way up there but some folks love stuff up where they can see it working. Those Eaton blowers need some custom carb mounting or maybe fuel injection. I've never seen one with any thing other than the rear air entry.
|
Re: Flathead 471 Blower manifold i am making It looks like a nice manifold. Do you have a pic of the bottom showing the ports? You do need a pop off valve as already stated. Are you going to produce these for sale? Bill
|
Re: Flathead 471 Blower manifold i am making 1 Attachment(s)
Nice work. I think flatoz and rat bastad in Aussie run these mitchell manifolds made in NZ.
|
Re: Flathead 471 Blower manifold i am making @tjw - Is it that you have a 3D printer???
|
Re: Flathead 471 Blower manifold i am making Petehoovie No 3 D printers here mate.
|
Re: Flathead 471 Blower manifold i am making For those who have asked these Blower manifolds will be available for sale in the next few weeks, the first production run is being cast now. They will be available in the USA from Jerry Hopkins in Texas his phone # 903 875 9557 email [email protected]. Thanks Terry
|
Re: Flathead 471 Blower manifold i am making have a price
|
Re: Flathead 471 Blower manifold i am making Boy! i sure wish i was the lucky one to machine that part.... Nice casting.
|
Re: Flathead 471 Blower manifold i am making Quote:
That's correct both Flatoz and Rat Bastard run their 471 blowers on the Mitchell manifold from New Zealand with blower drives from my little shop. This new intake looks extremely similar to the Mitchell. |
Re: Flathead 471 Blower manifold i am making you never said if it has a pop off valve or not
|
Re: Flathead 471 Blower manifold i am making When are you going to start casting Flathead blocks???
|
Re: Flathead 471 Blower manifold i am making I am a retired machineist with a bridgeport mill with a D.R.O. send one to me to mill.
|
Re: Flathead 471 Blower manifold i am making Quote:
BFD |
Re: Flathead 471 Blower manifold i am making Quote:
|
Re: Flathead 471 Blower manifold i am making Petehoovie. I am not going to cast blocks.
|
Re: Flathead 471 Blower manifold i am making what ever happen to these ever got made
|
All times are GMT -5. The time now is 11:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.