spark plugs for a Weiand head I have a B engine with a Weiand High Compression head. I have not run it before, but when I got it it had an old set of Champion L87YC 14mm sparkplugs.
Is anybody else running one of these heads? If so what plugs are you using? Thanks, Will |
Re: spark plugs for a Weiand head I have Champion RF10C.
|
Re: spark plugs for a Weiand head 2 Attachment(s)
Attachment 337396Attachment 337397
I have sold my Weiand Head. I am building engine up for my grandson and I am down sizing the engine. I have the carburetors setup with header for sale. Do you know of anyone who wants this setup? |
Re: spark plugs for a Weiand head I am not familiar with the L87YC, but 14mm plugs come in a wide variety of thread lengths and heat ranges. Be sure the threads do not go into the combustion chamber, they will carbon-up and can destroy the threads upon removal. Many early aluminum heads used H series Champions, 5/8" reach.
|
Re: spark plugs for a Weiand head Was the L87YC a plug for the VW beetle? That's what comes to mind. They had a longer reach than the J series but shorter than N series. Best to look in an old Champion catalog.
|
All times are GMT -5. The time now is 04:21 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.