The Ford Barn - Floor brace

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Floor brace (https://www.fordbarn.com/forum/showthread.php?t=261704)

dbaldwi3

04-11-2019 06:17 PM

Floor brace

1 Attachment(s)

I’m attaching a picture of the braces under the front floor board of my 1930 Tudor , are these factory or did someone just add these sometime in the past? Thanks in advance.

Bob C

04-11-2019 06:28 PM

Re: Floor brace

Factory but should be installed with rivets.

dbaldwi3

04-11-2019 08:35 PM

Re: Floor brace

Quote:

Originally Posted by Bob C (Post 1745990)

Factory but should be installed with rivets.

Bob Thanks I can’t seem to find just the rivets they only seem to sell them as a kit with the brackets. Im assuming they would be 1/4” x 1.25”?

jw hash

04-11-2019 09:47 PM

Re: Floor brace

Bratton`s handles the correct rivets part #28050 your problem is someone drilled the holes out to 1/4" the correct rivets are 3/16"

Bill G

04-11-2019 11:06 PM

Re: Floor brace

Wow, that is one heck of a battery access hole! What do you cover it with?

dbaldwi3

04-12-2019 04:19 PM

Re: Floor brace

Quote:

Originally Posted by Magicbox51 (Post 1746070)

Wow, that is one heck of a battery access hole! What do you cover it with?

Bill the floor has been replaced with a new one and the new battery cover was purchased through Snyder’s as for a cover for the old hole there wasn’t one just a odd shaped hole in floor covered with the stock floor mat!

All times are GMT -5. The time now is 01:26 PM.