34 radiator
 

Who makes the best show quality 34 radiator for stock engine?


Thanks

Re: 34 radiator
 

My vote is Brassworks. There are other good options available as well. I'm sure others will post their thoughts and suggestions.

Re: 34 radiator
 

Brassworks,X2

Re: 34 radiator
 

Brassworks craftsman are amazing. Lee showed me some of their restoration projects when I picked up my 35 radiator. Everything from Ford’s to airplanes, to Concourse quality restorations. My tanks were in good shape so I elected to have mine restored with a more efficient core. The can also build them from top to bottom to your specs.
It is hard to see the detail but the fins are shaped to promote air movement around the 3 rows of 3/4” tubes. They can provide a screw-on 1-4# check valve on the overflow tube. Works well!

Re: 34 radiator
 

X3 Brassworks as well.

Re: 34 radiator
 

Am I seeing that the tubes are staggered? Like such.
| | |
| | | |
| | |

Re: 34 radiator
 

That actually didn't show up like I typed it......

Re: 34 radiator
 

Yeah, the forum software does what it wants with horizontal spacing. I think I know what you are saying, though.

Re: 34 radiator
 

I have used BrassWorks 33-34 radiator and have been very pleased with them.

Re: 34 radiator
 

what is cost ?

Re: 34 radiator
 

The complete new one for the 8ba in my '39 p/u with a 4 inch core was north of a grand and I picked it up in person. It would have been a bit more if I wanted the top top tanks with the fan relief like an original but since I'm running an 8ba I didn't need the relief which made the top tank easier to build. Lee at Brassworks will work directly with you to make sure everything is exactly what you want and/or need. JMO.

Re: 34 radiator
 

Shameless plug here, I have a NIB 33-34 brassworks radiator if anyone needs one quick.

Re: 34 radiator
 

Is the used radiator in good condition? What is the cost? My email [email protected]

Re: 34 radiator
 

Radiator is SOLD

Re: 34 radiator
 

Haven't look lately, but a one time you could go on their site and price one out. They are somewhat custom built, so you need to select the way you want it configured.

Ok, just looked. They have one they call a drop-in replacement. So that should make it easier, $1004.00 is the listed price.

https://thebrassworks.net/collection...-reproductions