The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Preferred Vendor for parts? (https://www.fordbarn.com/forum/showthread.php?t=276875)

CC-Mo 02-17-2020 09:28 PM

Preferred Vendor for parts?
 

Hello, newbie here.
Just recently purchased a '30 Tudor Sedan. It needs the usual care but is sure a solid car. I've been driving it on short jaunts, really a lot of fun.
In order to get it running properly I've ordered a few parts. So far, just choke rod parts. Spring, bushing/rubber grommets.
Next, an intake/exhaust manifold due to mine being cracked.
The question is, who's the preferred vendor most here use?
Thanks in advance.

Jerry in Shasta 02-17-2020 10:06 PM

Re: Preferred Vendor for parts?
 

I like Bert's near Denver. Excellent parts and reasonable shipping prices

https://modelastore.com/

Gary WA 02-17-2020 10:16 PM

Re: Preferred Vendor for parts?
 

1 Attachment(s)
Berts or Brattons! Welcome to the Model A World of fun!

DBrer 02-17-2020 10:23 PM

Re: Preferred Vendor for parts?
 

I use many of the stores it just depends on price and the item. Like most of us we have many of the catalogs they offer and its nice to look around.

Fred K OR 02-17-2020 10:30 PM

Re: Preferred Vendor for parts?
 

Berts have many used parts is you want to use used parts. Or they also have all new parts if you want to go that route.

PalAl 02-17-2020 10:59 PM

Re: Preferred Vendor for parts?
 

I have parts catalogs from many vendors Bert's, Birdhaven, Bratton's, Gas Light, Mac's, Mike's, Snyders and there are more, most catalogs are free and most show exploded parts view with numbers which can be very helpful during assembly. I have also found cell phone pictures during tear down to be a good reference getting it back together right the first time. The red Les Andrews book is almost a must for refference. Consider joing a local Model A Club as most are a great bunch of people willing and wanting to help a fellow A'er.
Club members are also a good resorce for parts. M.A.R.C and M.A.F.C.A put out a great members magazine and the M.A.F.F.I. can supply endless information and is a must see.
Personally I think the best thing to do is join a club, get involved and enjoy Model A activites.

redmodelt 02-18-2020 12:48 AM

Re: Preferred Vendor for parts?
 

Snyder's

Steve Plucker 02-18-2020 01:46 AM

Re: Preferred Vendor for parts?
 

A and L, Bert's, Bratton's and Snyders.

rrich1 02-18-2020 01:57 AM

Re: Preferred Vendor for parts?
 

Snyders (super fast shipping so its my preferred dealer)
Berts
Brattons
Mikes Affordable A
Model A Medic
Macs/Ecklers

Each have essentially all the same parts. Places like Berts, Brattons, Mikes, Model a Medic will have old parts for purchase. They are all good. Take your pick

marty in Ohio 02-18-2020 06:53 AM

Re: Preferred Vendor for parts?
 

CC-Mo,
Let us know where you are located. I'm about 100 miles from Snyder's in Ohio and it's a fun drive for a couple of us "A" guys to go, have lunch, and be back in time to put some parts on. The Snyder's folks are friendly and know their stuff. They are my "go to" supplier.
Marty

TerryO 02-18-2020 09:21 AM

Re: Preferred Vendor for parts?
 

Quote:

Let us know where you are located. I'm about 100 miles from Snyder's in Ohio and it's a fun drive
I have ordered from several but I usually drive to Mikes because it's a nice 2 hr drive. Nice folks too :)


TOB

JD 1931 02-18-2020 10:03 AM

Re: Preferred Vendor for parts?
 

(Mikes) Mikesafordable, good people....

ryanheacox 02-18-2020 10:48 AM

Re: Preferred Vendor for parts?
 

I know from experience that A&L, Bert's, Bratton's and Snyder's all have excellent customer service.

Dick M 02-18-2020 11:40 AM

Re: Preferred Vendor for parts?
 

Bert's Model A Center. Quality parts, great advice, and they only charge actual shipping costs.

Ted Duke 02-18-2020 11:55 AM

Re: Preferred Vendor for parts?
 

Best? Hard to tell. Most responsive to me? Bratton's. And quickest shipper since I am in Virginia and they are in Maryland.


I have NOT had a problem with any of them, but I have been told I am lucky. All of the one listed and great and if you have a problem with ANY of them, TELL them. They want to know.

CC-Mo 02-18-2020 01:06 PM

Re: Preferred Vendor for parts?
 

Quote:

Originally Posted by marty in Ohio (Post 1853145)
CC-Mo,
Let us know where you are located. I'm about 100 miles from Snyder's in Ohio and it's a fun drive for a couple of us "A" guys to go, have lunch, and be back in time to put some parts on. The Snyder's folks are friendly and know their stuff. They are my "go to" supplier.
Marty

I'm in Southern Missouri. You guys are lucky to make a day trip over there.
I'd be like a kid in a candy store!

WTSHNN 02-18-2020 01:57 PM

Re: Preferred Vendor for parts?
 

I've probably bought something from all the major suppliers over the years.

I do most of my parts shopping online so the web store interface is important to me. I find that Bratton's is the easiest online store to use.

I have visited and toured Berts, Brattons, and Snyders and have found all to be welcoming and knowledgeable. Those are my go-to parts suppliers.

I've had two small problems with two vendors I won't name. I felt they could have done more to right a wrong. So, I stopped giving them my business and instead stick to the vendors who have come through for me in the 20+ years I've been playing Model A's and they keep me happy.

Being in Chicago most parts get to me in about the same amount of time regardless of where I order. I think with my three preferred vendors they try to get packages out the door as soon as possible so there isn't a lot of lag between order and delivery.

Regardless, we're incredibly spoiled to have the options available to us.

-Tim

Jon-Ohio 02-19-2020 04:21 PM

Re: Preferred Vendor for parts?
 

There is a parts dealer in the Springfield Mo area - I don't know anything about them .


Battlefield Antique Ford Parts
5054 S. Broadview
Battlefield, MO, 65619
417/882-7923
E-mail: [email protected]


I've always used Bratton's, Snyders or A&L - my favorite.
Jon in Ohio

captndan 02-19-2020 04:25 PM

Re: Preferred Vendor for parts?
 

Bert's all the way.

G Baese 02-19-2020 05:29 PM

Re: Preferred Vendor for parts?
 

Agreed, Bert's!


All times are GMT -5. The time now is 06:04 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.