The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   41 ford choke & Throttle Rod rubber connections (https://www.fordbarn.com/forum/showthread.php?t=288450)

Veeder 10-10-2020 06:54 AM

41 ford choke & Throttle Rod rubber connections
 

What is the best way to attach the new rubber
Connections to the existing rods. The originals
Are crimped on. I've cut those off and am thinking
about using epoxy
Thoughts?

fortyonerag 10-10-2020 07:48 AM

Re: 41 ford choke & Throttle Rod rubber connections
 

I have a buddy that used JB on them. Looks stock and works well.

I used a hydraulic cable crimper for some yacht wire balustrading I did a while back. Worked well but left hex crimp marks on the joints if thats a worry for you.

Veeder 10-10-2020 08:53 AM

Re: 41 ford choke & Throttle Rod rubber connections
 

Thks unfortunately I don't have one. Of those the side that connects 1to the carburator arm I did in a vise 1 and it should be fine it's the side on the cable side I'm debating best approach

fortyonerag 10-11-2020 04:23 AM

Re: 41 ford choke & Throttle Rod rubber connections
 

The JB my buddy did on his car looks great


All times are GMT -5. The time now is 10:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.