![]() |
starter button The starter button on the 49, you have to push very hard on it to work. I have a 49 51 shop manual and there is nothing in there on replacement ? Thanks for any help. Jack.
|
Re: starter button Before you work on the button, disconnect the battery.
To remove the button, compress the clip on the backside. Push the button forward ( toward the seat) and you'll see the connection wire. The bullet connector can be released by moving the clip. Replacement buttons can be iffy. I found a nos unit that fit perfectly. The repops wouldn't clip into place properly for me. |
Re: starter button Make sure it's grounded real clean to the dashboard metal. Some of the hard to push problem could be to make that ground.
|
All times are GMT -5. The time now is 06:32 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.