The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Drag link 1945 1/2 ton pickup (https://www.fordbarn.com/forum/showthread.php?t=286057)

D. Jones 08-23-2020 12:17 PM

Drag link 1945 1/2 ton pickup
 

I need to replace/repair the drag link on my 45 1/2 ton, the fixed ball end is loose. I've done a search here and looked at many posts and it appears there is no good solution. Some seem to suggest that a kit from Speedway was the answer but, all the kits I saw were for a straight tie rod or drag link, mine has a step or bend so, it appears to me, a straight one would have the ball setting at an acute angle. Am I missing something or am I just not seeing the correct solution?

Fordestes 08-23-2020 02:47 PM

Re: Drag link 1945 1/2 ton pickup
 

I bought one for my 46 half ton ,21A3306 ,I think it was from midwest ford, mine is a cross steer, the 40 looks almost the same but is a little shorter and will allow the gear to not be centered and cause slack in the steering from not being in the correct spot of the worm gear.

Fordestes 08-23-2020 03:13 PM

Re: Drag link 1945 1/2 ton pickup
 

I just looked up the number 21A 3306 and it shows to be a passenger car, the comm. part number is 21C3306, mabe someone will clarify this for us, the length of my link is 30 1/2 inches center of ball to the end of the rod and 31 inches overall outside without the sleeve and tie rod end installed.

35fordtn 08-23-2020 04:10 PM

Re: Drag link 1945 1/2 ton pickup
 

We have the 21C NOS in stock I think only one. If I remember I’ll measure this week

Bob NH 08-23-2020 06:51 PM

Re: Drag link 1945 1/2 ton pickup
 

Joe's antique lists a drag link for both cars and trucks ,21A-3306 42-48 $85.00

leon bee 08-23-2020 07:11 PM

Re: Drag link 1945 1/2 ton pickup
 

My 46 has a home-made one, two chunks of rod welded together with a tie rod end on both ends. This problem must be why.


All times are GMT -5. The time now is 04:56 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.