Which Spoke Straightener Works Easier and/or Better for a Novice? I need to straighten some spokes before mounting some used wheels I purchased.
I see two tools that are available from Snyder’s and Bratton’s. Will either one of them work easier and/or better for a novice? https://www.brattons.com/spoke-straightening-tool.html Or https://www.snydersantiqueauto.com/P...earchByKeyword Or, maybe there is a better tool that I don’t know about. Sent from my iPhone using Tapatalk |
Which Spoke Straightener Works Easier and/or Better for a Novice? By the way, I tried searching, but I didn’t find much information. I use Tapatalk for this forum. I don’t know if it submits funky searches or not.
Sent from my iPhone using Tapatalk |
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? might sound nutz- but I use an old pipe wrench to bend my spokes straight.
seems to work pretty well. |
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? A piece of bar stock with a notch ground into it also works. There is not necessarily one perfect tool for all applications from my experiences.
|
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? I made a fitting to go on the end of a slide hammer
I pop it moderately until straight visually |
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? Quote:
|
Which Spoke Straightener Works Easier and/or Better for a Novice? Quote:
Good idea. It looks like Tapatalk is doing something strange to the searches. Sent from my iPhone using Tapatalk |
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? Quote:
|
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? When a spoke is bent, I assume the spoke is stretched a certain amount. When straightening the spoke again, is there a chance of making to wheel not run true (wobble) as it is now longer than the other spokes?
On a side note, has anyone used the adjustable spoke Model A wheels? |
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? My experience is that badly bent spokes should not be repaired. Replace the wheel
I’ve been afraid to heat a spoke to shrink because of embrittlement But no expert on metallurgy I’ve had Kelsey Hayes model a wheels. Didn’t like the look |
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? Quote:
|
Re: Which Spoke Straightener Works Easier and/or Better for a Novice? K-H made 19” wheels. I was referring to those.
Maybe not fair because I haven’t owned the repop adjustable spoke wheels. I’ve not HEARD good reports on them |
All times are GMT -5. The time now is 10:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.