victoria wood
 

I am trying to nail the sheet metal to the wood structure on my 31 Victoria. Does anyone have a picture of the wood that the side of the roof under the gutter and above of the door nails to? I seem to be missing something. Thanks, Art

Re: victoria wood
 

Picture of wood above window.

Re: victoria wood
 

Re: victoria wood
 

Thanks, but I need pics of above the door that the below the gutters nail to on the ouside. It is not clear on the Fordwood diagram.

Re: victoria wood
 

Art
keep in mind, you have a steel back. the wood is different then a leather back. so you need some pictures of a steel back.

Re: victoria wood
 

Do these photos of Steel-Back wood help?

Re: victoria wood
 

Almost, how is the the ouside. under the rain gutter nailed on? It could only be seen if the upper door jamb trim piece was not installed. As you can see in this picture the there is no wood for the nailing flange to attach to. Thanks, Art

Re: victoria wood
 

This Victoria Wood is a lot more entertaining-and this is a great clip:

https://www.youtube.com/watch?v=lNU5KVa_Tu8

Re: victoria wood
 

Maybe side by side you can see the difference;

Re: victoria wood
 

Art
you are missing the lower door header piece of wood and do you have the door header cover it will cover up them nail holes. that cover is different then the leather back.

Re: victoria wood
 

As well as the piece of wood you're missing (as in Bob's middle picture) there's the door header cover piece(s?) jw refers to:

-

Re: victoria wood
 

These are pictures on the metal pieces.

Re: victoria wood
 

Now I see it. I do have the two trim pieces but I must be missing the wood header piece. Does anyone have a picture of it or the dimensions? Thanks, Art

Re: victoria wood
 

try classic wood. I would think they will sell just the two you need.

Re: victoria wood
 

I have a leatherback and I'm not familiar with the wood header and steel jam from a steel back. If they are the same the wood piece that screws to the header is 3/4" sq. which supports the inside edge of the cap which covers the wood header.

Re: victoria wood
 

Tim
they are NOT the same.

Re: victoria wood
 

I think this is what you need. For some reason this is the largest it will make it. Send me your email and I'll email the original Tiff.

Re: victoria wood
 

Thanks Mike, but that is the quarter header wood. I am needing the door jamb wood. Art

Re: victoria wood
 

oops

Re: victoria wood
 

My 190A Steel-Back is not available to check right now, but I believe that the rain gutters are welded to the body on the Steel-Back.