Stripped threads on 53 flathead I have a 53 flathead and some of the threads on the carburetor are in rough shape. The fuel line tightens up but leaks. Any ideas besides getting a new top piece for the carb? Any help is appreciated as always
|
Re: Stripped threads on 53 flathead Did you try the yellow Teflon tape around the fitting threads, I think it hold up to the gasoline?
|
Re: Stripped threads on 53 flathead Ya really don't want to use teflon (even the yellow) on that kind of a fitting, especially on a carburetor. DD
|
Re: Stripped threads on 53 flathead X2 of V8Coopman. The only "good" thing about yellow teflon is that it is easier to see when you continually have to take your carb apart to dig it out and get it running again.
|
Re: Stripped threads on 53 flathead If it's a generic 94, a new top should be a cheap easy, fix.
|
Re: Stripped threads on 53 flathead Lots of parts around for these carbs. Advertise for a top in the swap section. If worse come to worse, you can get a top from Charley Price.
|
All times are GMT -5. The time now is 03:17 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.