The Ford Barn - Ammeter

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Ammeter - Needle (https://www.fordbarn.com/forum/showthread.php?t=296749)

GT1929

04-02-2021 05:41 PM

Ammeter - Needle

Need picture of how needle fits in orginal ammeter.

Dan Partain

04-02-2021 11:18 PM

Re: Ammeter - Needle

1 Attachment(s)

Original Ammeter

redmodelt

04-03-2021 12:54 AM

Re: Ammeter - Needle

What exactly do you need to know?

rotorwrench

04-03-2021 06:31 AM

Re: Ammeter - Needle

This link to Vince's site has good photos.
http://www.fordgarage.com/pages/ammetertool.htm

The ammeters were about the best product for the price ever made. It's too bad that most of the reproductions aren't as sensitive as the originals. The freedom of needle movement was excellent on the old originals but modern reproductions, not so much.

Bob Bidonde

04-03-2021 07:53 AM

Re: Ammeter - Needle

The needle is part of a D'Arsonval Movement which reacts to the magnetic field around the horseshoe shaped bar when current flows through the bar. The movement is very sensitive, so any change in friction or unbalance of the centering springs will cause the ammeter to have an erroneous reading. This is a job for someone with the steadiness of a watch maker or jeweler. My recommendation is to find a better gauge.

dpson

04-03-2021 09:06 AM

Re: Ammeter - Needle

The newer reproduction ammeters are basically junk. If you tip it forward the needle falls off and you have to pull the cover off to put it back on. It's too bad they bother to make this junk. Even the vendors don't like them, but they are all that's available right now as far as I know.

GT1929

04-08-2021 12:08 AM

Re: Ammeter - Needle

The needle doesn't appear to have a hole in it so I guess it just gets squeezed between the two pieces?

rotorwrench

04-08-2021 11:01 AM

Re: Ammeter - Needle

The needle should be attached in some way to the spindle of the rocking armature or it could slip on the spindle and not return to the zero indication.

Is this a reproduction ammeter?

redmodelt

04-08-2021 05:19 PM

Re: Ammeter - Needle

Designs changed over the years. Could look original but might be a replacement. While I am not sure, could have been more then one company making the meters for Ford. If it has Ford on the face, it is not original. It would be a replacement/aftermarket. Suggest posting a photo of what you are working on so everyone can be on the same page.

whirnot

04-08-2021 08:04 PM

Re: Ammeter - Needle

Has anyone used the Ammeter that nurex sells? Pretty spendy at $80 but they say it's US made.

BRENT in 10-uh-C

04-09-2021 09:00 AM

Re: Ammeter - Needle

Quote:

Originally Posted by whirnot (Post 2005211)

Has anyone used the Ammeter that nurex sells? Pretty spendy at $80 but they say it's US made.

Bill, I have not tried them as I felt these were old NORS units and not something they were manufacturing today. The initial turn-off for me was the number plate was incorrect along with the plating, but for someone that was needing a quality 30-30 meter instead of a 20-20, then they would likely be a value.

Badpuppy

04-09-2021 09:31 AM

Re: Ammeter - Needle

If there's more than 15A through the meter either direction there's something wrong. It measures only battery current. 20-20 is appropriate for any model A vehicle, unless the wiring has been modified.

All times are GMT -5. The time now is 03:08 AM.