28 Cowl lacing questions Restoring an August 28 roadster and have two questions regarding the cowl lacing.
First, do the heads of the rivets face inward toward the engine? That is my interpretation of the JS. 2nd, how is the wire\lacing fastened on the bottom. I.E., does it wrap around or other? Pictures here would be appreciated. Thanks in advance for your input. |
Re: 28 Cowl lacing questions 1 Attachment(s)
Here is a picture of the original wire ends. Be sure the wire runs through the center of the lacing, and not on top of it. Yes, the rivet heads face the engine.
Pull and wrap the wire tight as pictured, then tighten the center hook to snug it more. |
Re: 28 Cowl lacing questions 2 Attachment(s)
OOps, here's the right picture. BTW, to make holes in the lacing for the rivets, I use an awl.
|
Re: 28 Cowl lacing questions Well, I’m pretty sure I’ll have to buy new lacing. How do you get the wire to run inside of it? I’ve just about ruined mine trying to make it flatter. Thanks all for the help
|
Re: 28 Cowl lacing questions Just round the wire ends so they are not sharp and it will go through the center of the welting - at least mine did. I bought my welting at A&L Parts Specialties.
|
All times are GMT -5. The time now is 12:47 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.