The Ford Barn - Water Inlet for Water Heater

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Water Inlet for Water Heater (https://www.fordbarn.com/forum/showthread.php?t=200724)

Tom Wesenberg

07-17-2016 03:28 PM

Water Inlet for Water Heater

2 Attachment(s)

Does anyone know if Ford sold the water inlet with a threaded fitting for a water heater for the Model A?
It even has an "A" on the pipe plug.
Now, is that number H98W or is it M86H?
This is a quality looking piece I found at a swap meet years ago.
Wish I had the matching outlet, but I'll make my own by welding a pipe fitting to the original outlet.

Drive Shaft Dave

07-17-2016 03:41 PM

Re: Water Inlet for Water Heater

That is a good question, nice piece though.

CarlG

07-17-2016 06:37 PM

Re: Water Inlet for Water Heater

I've had several water inlets with the heater connection in different orientations. Not sure that Ford made any of them. The vendors list one now that's aluminum, but wanted an iron one.

All times are GMT -5. The time now is 08:01 AM.