‘36 fordor project videos
 

Humbly following in Mart’s steps, I’ve decided to get out in the garage and start working on my project and make some videos while I’m at it.

I’m still working on style, delivery, and content, so please be kind as I figure that stuff out.

Hope you enjoy.

Intro
https://youtu.be/S3b73ySyrHc

Episode 1.
https://youtu.be/djQvvXsX800


Please feel free to leave production feedback (content, editing, music choice, running commentary/no running commentary etc.) here or in the comments on YouTube.

Of course I look forward to comments and feedback on the actual project here as well.

Thanks!
Mike

Re: ‘36 fordor project videos
 

Great start, I will be following your project.

Re: ‘36 fordor project videos
 

Episode 2 is up.

https://youtu.be/4Y12g50ac70

As always, feedback is welcome and appreciated.
I tried a little more running commentary this time.

Thanks, T

Re: ‘36 fordor project videos
 

Good videos, Mike! Damn you work fast, though. Did that later engine come out of the car, or is it one that you have destined to eventually go into the '36? Those front exhaust manifold bolts are SUPPOSED to be larger vs the two rear ports. The larger ones are 7/16" bolts that require a 5/8" socket to remove.


It's a shame you broke that exhaust bolt. I could see that it showed signs of possibly breaking when you first found it to be so tight. It's possible that you may run across one or more of the head bolts that act the same way. If you encounter one that seems tighter than the rest (likely frozen), I normally try to gingerly move the bolt just barely in the opposite direction (tightening) to see if it may help to break it free. If it does break free, cycle the bolt back and forth (loosening/tightening) in small, but ever increasing increments until it feels loose enough to turn on out. Saves a lot of grief sometimes to invoke a little patience. We're gonna enjoy following along with you. DD

Re: ‘36 fordor project videos
 

Thanks coop. Your questions make me think maybe I should do an overview of the whole project for a video soon.

The engine is one I picked up to replace the bone stock 21 stud that currently resides in the engine compartment. I was told, and this is what drew me to it, that it has a 4” mercury crank as well as “everything else” like truck pumps that I’d need to put it in the 36.
We’ll find out soon wether it’s true or not!
Thanks for the tips on the bolt removal as well!

T

Re: ‘36 fordor project videos
 

Hello everyone!
I've uploaded three new videos. Collectively they're a slide show of a visit I made to the Early V8 Ford Foundation Museum in Auburn Indiana.

Part 1
https://youtu.be/g2988xUY3d0
Part 2
https://youtu.be/UWSAhs09DgE
Part 3
https://youtu.be/6eEqjKy6zlY

Thanks for checking them out!
Currently working on another video of the engine.
Check back soon!

T

Re: ‘36 fordor project videos
 

Hello everyone.
Episode 3 is now up.

https://youtu.be/Kmna405CHmk

as always, comments are welcome.

Thanks,
T

Re: ‘36 fordor project videos
 

Hello Barners,
Hope everyone is staying home and healthy!

Episode 4 is up, if anyone is interested. As always, feedback is welcome!

https://youtu.be/Nc2PSKAutXM

Thanks. T

Re: ‘36 fordor project videos
 

Part six is up.

https://youtu.be/TouSyanjWqU

Re: ‘36 fordor project videos
 

subscribed, awesome Mike!

Re: ‘36 fordor project videos
 

Thanks Cajun!

Re: ‘36 fordor project videos
 

Episode #7 is available for your perusal. Comments and feedback is always welcome!

Thanks,
T

Re: ‘36 fordor project videos
 

Episode #8 is up. Check out some great paint grinding and primer spray8ng as I clean up the block a bit and prime it.

Thanks!
T

Re: ‘36 fordor project videos
 

Not seeing it listed on the Tube, Mike. Wouldn't it be found at the top?

Re: ‘36 fordor project videos
 

Sorry ‘36 5w, I hadn’t seen your question. Here’s a link for episode #8

https://youtu.be/eT3l8E2I3dY

Re: ‘36 fordor project videos
 

Hey everyone! Episode #9 is up and you actually get to see some of the car and not just the engine!
Thanks for checking it out and please, leave comments or feedback.

Mike.

https://youtu.be/dI8g-52VVFg

https://live.staticflickr.com/65535/...a7a475420f.jpgUntitled by Mike Terranova, on Flickr

Re: ‘36 fordor project videos
 

Episodes # 10 and 10.5 are up!
Thanks for checking them out and as always, please feel free to leave feedback or comments!




https://youtu.be/L3NntWwyOgM
https://live.staticflickr.com/65535/...f98cc633_z.jpgUntitled by Mike Terranova, on Flickr


https://youtu.be/UnVirMt-T3s
https://live.staticflickr.com/65535/...41c652e7_z.jpgUntitled by Mike Terranova, on Flickr

Re: ‘36 fordor project videos
 

Good morning fellow barners! Episode #11 is up.

https://youtu.be/j8QXFNpPq2A

https://live.staticflickr.com/65535/...78de55d58a.jpgUntitled by Mike Terranova, on Flickr


As always, please feel free to leave comments, feedback or likes/dislikes.

Thanks!
Mike