The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   OD 1950 Ford Transmission (https://www.fordbarn.com/forum/showthread.php?t=188822)

fordbruce 02-08-2016 11:53 PM

OD 1950 Ford Transmission
 

Which transmission case number do I need for a 1950 Ford flathead v8 ? THANKS 😊

oneoldtruckguy 02-09-2016 07:34 AM

Re: OD 1950 Ford Transmission
 

Not sure which one you need but I have a nice 51 side loader if You need one. I used the guts and put them in a 40 top loader for my 50 F1. $40.00 plus shipping. Thanks

toby 02-09-2016 07:44 AM

Re: OD 1950 Ford Transmission
 

case: 8A-7222
tail: 8A7851-B

Rowdy 02-09-2016 11:43 AM

Re: OD 1950 Ford Transmission
 

I have 3 cases, and 4 tail shaft housings. I can check the numbers later this week. Rod

rotorwrench 02-09-2016 12:18 PM

Re: OD 1950 Ford Transmission
 

1949 & 50 are the same but they changed all the gears to the diamond type in 1951. I don't know how interchangeable the stuff is between the pre 1951 and the post 1951 since all the part numbers changed.

Rowdy 02-09-2016 12:22 PM

Re: OD 1950 Ford Transmission
 

I did not see the OD in the title line of the thread. None of the tail shaft housings I have are for OD. Rod

tubman 02-09-2016 01:49 PM

Re: OD 1950 Ford Transmission
 

Quote:

Originally Posted by Rowdy (Post 1238525)
I did not see the OD in the title line of the thread. None of the tail shaft housings I have are for OD. Rod

Even if they were, they wouldn't work because the position of the rear mount changed in 1951 because of the introduction of the FordaMatic trans mission.


All times are GMT -5. The time now is 01:45 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.