B4 water pump on “A” OHV conversion We have a new leakless B4 water pump , is it possible to fit to a miller OHV head that is designed for the 4 bolt model A water pump?
|
Re: B4 water pump on “A” OHV conversion This might help to start;
http://www.fordgarage.com/pages/cragarwaterpump.htm and even better; http://millerhi-speedheads.com/products.html |
Re: B4 water pump on “A” OHV conversion I don't think so. The B pump has 3 mounting bolts, the Miller has 4 and would accept the A pump but should have the Miller pump which is like the A but has an air-bleed hole at the top. By the time you put an adapter from 3 bolt to 4 bolt the pulleys wouldn't line up, HOWEVER, if you have the '33-'34 B pump which is shorter, an adapter could possibly be made to work???
|
Re: B4 water pump on “A” OHV conversion Thanks Jim that mirrored my thoughts on pulley placement. So simple answer is , spend more money!!
|
Re: B4 water pump on “A” OHV conversion That's it! They are available thru millerhi-speedheads.com
|
Re: B4 water pump on “A” OHV conversion RE;the Miller has 4 and would accept the A pump
See my first link, the 4 holes are not the same as Model A so you couldn't bolt an A pump up anyway. |
Re: B4 water pump on “A” OHV conversion Yes thanks for that redmodelt I did see your link and till then did not know std A and OHV pumps were not interchangeable.
|
Re: B4 water pump on “A” OHV conversion Neither did I, but I'm not a Cragar-guy, I like my 4-port Riley's!
|
All times are GMT -5. The time now is 09:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.