Gap between door opening and seat I am looking to possibly purchase a '31 A Roadster Pickup but I find that the gap between the front of the door opening and the front of the seat is so tight that I have a very difficult time getting into the vehicle. I have been told that this is a known issue with those vehicles.
My question for those who have had to deal with this issue is, What did you have to do to eliminate the problem? |
Re: Gap between door opening and seat Be sure that the seat cushion is properly positioned on its platform. There are probably two vertical pins on the front edge that fit into holes in the seat frame. If the seat isn't placed back far enough so that the pins are seated (no pun intended!) it will contribute to the problem noted. I had this problem with my '30 coupe. Getting the seat cushion into its proper location made a big difference. The PO was unaware.
|
Re: Gap between door opening and seat If you are tall forego the pickup
|
Re: Gap between door opening and seat Quote:
I'm not tall but I am old (81) and I have had both knees replaced which does limit my flexibility and dexterity. |
Re: Gap between door opening and seat Sedans are great for better legroom, for a roadster maybe modifications could make it roomier also.
|
Re: Gap between door opening and seat In my 29 roadster I have found that you do need to put first foot in, sit down and kind of pick your other foot up and over. Only way my 13s are going in. Actually true to a lesser degree with my Town Sedan.
|
Re: Gap between door opening and seat Quote:
|
Re: Gap between door opening and seat There are methods to make getting in/out possible, but not easy no matter what you do. That's one reason why I have a Fordor sedan. Moved the seat back, bent shifter lever, now I am comfortable at 6' 4" and 205lbs. Also still plenty of room for passengers in the back seat.
|
Re: Gap between door opening and seat That is also the reason I have a Tudor. I went to a personal property auction that had a pretty nice roadster. I tried to get into it and my feet wouldn't bend in the proper way to get in from the drivers side. I could get in from the passenger side, but I'll be darned if I was always going to slide across and past the shifter, so I passed on that car, and found a Tudor. And even on the Tudor I moved the seat back 3 inches, and now is pretty comfortable.
|
Re: Gap between door opening and seat Quote:
|
Re: Gap between door opening and seat Quote:
|
Re: Gap between door opening and seat Quote:
|
Re: Gap between door opening and seat Quote:
Depending on the 31A he has, the steering column mount may be attached to the Dash. If it is not and is attached to the gas tank it can easily be converted to a dash mount. Then no worries about tugging on the steering column. I do not have bad knees, but there is a technique to getting in and out. My technique is to find a way to get your feet/legs in before getting your body in, for me as mentioned in another post is to not use the running boards to get in. To get out, 1st scoot over toward the passenger side a little so you can get your feet out the narrow way and then slide over towards the drivers door. Use of running boards is up to you. All this works better if you have a vinyl seat instead of a cloth seat. |
Re: Gap between door opening and seat Quote:
|
Re: Gap between door opening and seat Quote:
|
Re: Gap between door opening and seat I recently looked at a 29 Pheaton and didn't buy it for this reason. I had to lay across the seat and drag my feet in to get into the car. Ed
|
Re: Gap between door opening and seat carbuybill - A suggestion
See if you can talk to the current owner and go try again, see what he does. Or take someone along that has one and see if you can find a way you are comfortable with. If you find a way, it becomes second nature after awhile and you do not even think about doing it. |
Re: Gap between door opening and seat Each person has to create their own method. Consider where and how well you bend. Then pass on the truck, the problem will only get worse with time.
|
Re: Gap between door opening and seat Quote:
|
Re: Gap between door opening and seat Quote:
|
All times are GMT -5. The time now is 07:22 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.