Kelsey Hayes Wire Wheels/39 Lincoln Drums I am a little confused seems to be happening a lot lately. As far as I know if you run 35 Wire Wheels or Kelsey Hayes Wire Wheels . And you are using 40 thru 48 Hydralic brakes including Lincoln brakes. A spacer ring is required to match the earlier drums and Spindel tabs that are on the 32/35 Brakes. I am using new Reproduction 39 Lincoln Brakes. They came with Plates like Spacers . These do not solve my problem as I still back to a flat surface with or without the plates. These plates do have a raised rib on the I.D. is that supposed to solve the problem? Stan
|
Re: Kelsey Hayes Wire Wheels/39 Lincoln Drums Did you call the manufacturer of the drums? They should have an answer.
|
Re: Kelsey Hayes Wire Wheels/39 Lincoln Drums 3 Attachment(s)
I run Kelsey Hayes Bent Spoke Wheels with original Lincoln backing plates, 1935 Spindles and Brake Drums - so NO spacers needed front or rear for me.
|
Re: Kelsey Hayes Wire Wheels/39 Lincoln Drums Quote:
Peter.... That car is as pretty on the bottom as it is on top! DD |
Re: Kelsey Hayes Wire Wheels/39 Lincoln Drums Quote:
Thanks - corrected to No spacers! |
All times are GMT -5. The time now is 09:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.