The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   adjustment on 1929 open cab Pickup seat ? (https://www.fordbarn.com/forum/showthread.php?t=286195)

McMimmcs 08-26-2020 01:48 AM

adjustment on 1929 open cab Pickup seat ?
 

One of the members told me there is an adjustment ( forward / backward ) on the 1929 open cab pickup. If there is I can not find it. Very tight fit. Please help.

Ted Duke 08-26-2020 07:08 AM

Re: adjustment on 1929 open cab Pickup seat ?
 

No adjustment.

rocket1 08-26-2020 07:59 AM

Re: adjustment on 1929 open cab Pickup seat ?
 

ccpu seat is the same no adjustment,at 5ft. 11" not to bad,taller yikes!

McMimmcs 08-26-2020 08:16 AM

Re: adjustment on 1929 open cab Pickup seat ?
 

if no adjustment, is there a solution ?

1931 flamingo 08-26-2020 08:39 AM

Re: adjustment on 1929 open cab Pickup seat ?
 

Some remove the back cushion and "tie" the springs shorter, others make a new board and install 2-3" of foam covering and then upholster. All 29's are smaller than the 30-31's.

Paul in CT

Jembow 08-26-2020 04:47 PM

Re: adjustment on 1929 open cab Pickup seat ?
 

I'm not tall but I had to tie the springs to pull the back cushion in

The Master Cylinder 08-26-2020 04:53 PM

Re: adjustment on 1929 open cab Pickup seat ?
 

You ever get that claustrophobic feeling? I got in a friends ccpu once and thought I wasn't going to get out again! I'm 6'2".

BRENT in 10-uh-C 08-27-2020 07:43 AM

Re: adjustment on 1929 open cab Pickup seat ?
 

Quote:

Originally Posted by 1931 flamingo (Post 1924332)
Some remove the back cushion and "tie" the springs shorter, others make a new board and install 2-3" of foam covering and then upholster. All 29's are smaller than the 30-31's.

Paul in CT

Quote:

Originally Posted by Jembow (Post 1924447)
I'm not tall but I had to tie the springs to pull the back cushion in

Compress the seat spring to the correct height while installing the seat cover. Then no need to tie the springs.

McMimmcs 08-27-2020 07:49 AM

Re: adjustment on 1929 open cab Pickup seat ?
 

Quote:

Originally Posted by BRENT in 10-uh-C (Post 1924596)
Compress the seat spring to the correct height while installing the seat cover. Then no need to tie the springs.

Thanks everyone. I'll do as suggested.


All times are GMT -5. The time now is 10:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.