Split wishbone, pitman inference 2 Attachment(s)
Split my bones and installed drop axle, running a stock steering box, how do I cure pitman arm interference? I’ve got a standard and shortened arm, both are bad. Can I bend it outboard to clear the bone? Any advice not involving a diff steering box? Thnx
|
Re: Split wishbone, pitman inference Quote:
I'm not a Model A guy, buy there are Pitman arms with the ball on the inside, toward the center of the car. That'll get the drag link away from that wishbone. In fact, is it possible to turn your Pitman arm around, if it is sitting on a SQUARE shaft? Coop . |
Re: Split wishbone, pitman inference Quote:
Terry |
Re: Split wishbone, pitman inference 1 Attachment(s)
Maybe if you turned the pitman arm around like it originally was it would clear.
|
Re: Split wishbone, pitman inference Quote:
Could you share a photo of your bends showing the arm clearance please? |
Re: Split wishbone, pitman inference Quote:
|
Split wishbone, pitman inference Quote:
I will try later today Terryhttps://uploads.tapatalk-cdn.com/202...2f1dba41e0.jpg |
Re: Split wishbone, pitman inference Why not mount the radius rod inboard of the frame mount? Or place the mount inboard on the frame.
These set ups don't do a real good job of replacing the wishbone. |
Re: Split wishbone, pitman inference Quote:
|
Split wishbone, pitman inference |
Split wishbone, pitman inference https://uploads.tapatalk-cdn.com/202...af198afa89.jpg
Sent from my iPhone using Tapatalkhttps://uploads.tapatalk-cdn.com/202...5cefe86450.jpg |
Re: Split wishbone, pitman inference YUP turn it around and you may want to bend the steering arm down a bit.
|
Re: Split wishbone, pitman inference Quote:
|
Re: Split wishbone, pitman inference Quote:
|
All times are GMT -5. The time now is 03:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.