What gauge steel to use??? Wondering if anybody can advise me on the correct guage of sheet metal steel to use on my Roadster body??? It mics out around .0048" to .0050" which would be about an 18 gauge sheet metal. All parts that were measured were rusted so no way to tell what original thickness was. Please e-mail me at [email protected] Thanks very much for any help!!!
|
Re: What gauge steel to use??? Ford used 19 guage. I use 20.
|
Re: What gauge steel to use??? I use 18ga. It's a little harder to shape but it also holds it's shape better.
Ron |
Re: What gauge steel to use??? I seem to have more warping with 18.
I gas weld on body patch panels. |
Re: What gauge steel to use??? 18ga
|
Re: What gauge steel to use??? Thanks for the help!!! I ended up going with the 18 ga.
|
All times are GMT -5. The time now is 01:14 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.