Home made tool that works really well. I wanted to tear down and rebuild an early Ford 3 speed top loader. I decided to invest an hour or so and knock up a simple pair of brackets to act as a stand. I'm part way through the rebuild and can say they work really well. They are made from 1" angle iron with just one weld per side.
You can use it down flat: https://i.postimg.cc/vBz22b9G/20210201-183443.jpg Or up on end: https://i.postimg.cc/L58CrwBL/20210201-183500.jpg The short legs allow the input shaft to be clear of the bench when on end. https://i.postimg.cc/tJvSyk2f/20210201-183514.jpg It will also stand up on the back end when the case is empty, which can be useful. It was an idea I wanted to try, I tried it and it worked really well so I thought I'd share. Mart. |
Re: Home made tool that works really well. Nice job Mart. Cool idea.
|
Re: Home made tool that works really well. Neat.
|
Re: Home made tool that works really well. Very nice!
|
Re: Home made tool that works really well. Well done, Jack.
|
Re: Home made tool that works really well. It's better than the pipe in the drain hole. Newc
|
Re: Home made tool that works really well. Well done for sure !
|
Re: Home made tool that works really well. Great idea for a transmission work stand.
|
Re: Home made tool that works really well. cheap simple yet effective their the best kind Thanks for sharing
|
Re: Home made tool that works really well. I commend you for innovation and sharing
|
Re: Home made tool that works really well. Very cool. I made one similar to that, except not the short legs. That's a very ingenious design. Thanks for sharing.
|
Re: Home made tool that works really well. Looks great!
|
Re: Home made tool that works really well. Thanks for sharing such a great idea! Smart feller...
|
Re: Home made tool that works really well. cool idea!
|
Re: Home made tool that works really well. Very nice Mart.
|
Re: Home made tool that works really well. Mart, That is an excellent tool. Brilliant in it's simplicity!
|
Re: Home made tool that works really well. Yep, well done!
|
Re: Home made tool that works really well. I have to add my opinion, too.
A very good, well thought out idea. Thank you. |
Re: Home made tool that works really well. Mart, very nice! you nailed it, I'm gonna copy this! thanks, smart tool for sure:)
|
Re: Home made tool that works really well. Great idea thanks for sharing we can always use a extra hand. But now it looks like you need to build a bigger work bench
|
All times are GMT -5. The time now is 01:58 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.